Description
- LCD DISPLAY—easy for you to read and monitor..
- BUILT IN MICRO-COMPUTER—can accurately display to 0.1℃..
- LARGE CONTROLLING RANGE—-55~120℃ for cooling, heating device..
- Please install the thermostat firmly in a stable place to avoid collision, moisture and water resistance, and keep away from the magnetic field..
- WIDELY USED IN—grain depots, warehouses, machine rooms, aquaculture, textile and other places that need warming, cooling..
- ›See more product details.
- Imported from UK (Sizes & Specifications are based on the UK Market).
Specifications:
Temperature control range: -50 ~ 120 ° C
Measurement Accuracy: 0.1 ° C
Control accuracy: 0.1 ° C
Hysteresis accuracy: 0.1 ° C
Refresh rate: 0.5 S
Input Power: AC 110V~220V
Output: 1 Channel relay output, capacity = 10A
Environmental requirements: -10 ~ 60 ° Humidity 20% -85%
Measuring inputs: NTC (10K 0.5%) Waterproof sensor 0.5M
Length*Width:100*52mm
Features:
*Show the real time temperature. With the functional button on
the panel, you can set the working values.
*Buzzer alarm design, when the temperature is higher or lower
than the set alarm value, the display screen will flash and the
buzzer will alarm. Meantime, the relay will cut off the output to
protect the circuit.
*1m long Temperature sensor :Wide temperature controlling
range:-50~120℃; can be accurately controlled to 0.1℃.
*This temperature controller can work in 12V dc system, or you
can use a AC to DC module when you don’t have a dc power.
*It can be directly installed or embedded in the panel of
industrial control equipment, and is widely used in the field of
hatching, equipment chassis, air conditioning system, etc.
Quick use
1.Connect the power supply and load according to the
instructions. Be careful not to over pressure and overload!
2.Setting mode, long press SET for 3 seconds will display P1
Short press SET to set H (red light) to heating mode C (green
light) to cooling mode
3. Set the stop temperature, press the SET screen once. Press the
up and down keys to directly set the desired temperature.
4.ENT is the confirmation button, long press this button to
achieve the function of the switch
